Nortel Networks 1000M - Manual (Page 86)

86 Installing the Cabinet system
Note: Figure 29 "Cabinet and Chassis system mix-and-match
expansion configuration" (page 87) is only an example of one of many
possible configurations using Cabinet systems and Chassis systems.
In this example, the SSC card in the main cabinet of a Cabinet system has
one dual-port fiber expansion daughterboard installed in the top connector
and one single-port IP expansion daughterboard installed in the bottom
connector. The dual-port fiber expansion daughterboard in the top connector
provides card slots 11–20 and 31–40. The single-port IP expansion
daughterboard in the bottom connector provides card slots 21–30.
Nortel Communication Server 1000
Communication Server 1000M and Meridian 1 Small System Installation and Commissioning
NN43011-310 01.04 Standard
Release 5.0 13 May 2008
Copyright © 2008, Nortel Networks
.