Nortel Networks 1000M User Manual
Page 175
Installing Fiber Receiver cards on expansion cabinets and chassis
175
•
To install the 10 m (33 ft) plastic fiber-optic cable, refer to
82 "Plastic fiber-optic connection on Fiber Receiver card" (page
176)
•
To install glass fiber-optic cable, refer to
fiber-optic connection on Fiber Receiver card" (page 177)
5
Insert the Fiber Receiver card in slot 0 of the Expansion Cabinet or
Chassis, as shown in
Figure 84 "Fiber Receiver card in slot 0 of the
fiber expansion cabinet" (page 178)
.
6
Route the fiber-optic cable around the Cable Routing Guide as
shown in
Figure 84 "Fiber Receiver card in slot 0 of the fiber
Note: Be sure to wrap the cable a minimum of one complete
loop around the guide. This ensures sufficient cable for removing
the Fiber Receiver card later.
—End—
Nortel Communication Server 1000
Communication Server 1000M and Meridian 1 Small System Installation and Commissioning
NN43011-310
01.04
Standard
Release 5.0
13 May 2008
Copyright © 2008, Nortel Networks
.