Floor mounting, Figure 38 securing the cabinet to the wall – Nortel Networks 1000M User Manual
Page 103
Floor mounting
103
10
Adjust the cabinet so that it is straight and level. Fasten the bottom
of the cabinet to the wall with the two 25 mm (1 in.) #12 screws
provided with the cabinet.
Figure 38
Securing the cabinet to the wall
11
If additional expansion cabinets are being installed at this site, repeat
through
to install those cabinets.
—End—
Floor mounting
Items required
To mount the cabinet on the floor you need:
•
the optional pedestal for floor mounting
•
four #14 screws provided to secure the cabinet to the pedestal
•
the equipment layout plan as developed in the chapters on system and
site requirements in Communication Server 1000M and Meridian 1
Small System Planning and Engineering (NN43011-220)
WARNING
An empty cabinet weighs 12 kg (26 lb). Get help to lift the cabinet
if necessary.
Nortel Communication Server 1000
Communication Server 1000M and Meridian 1 Small System Installation and Commissioning
NN43011-310
01.04
Standard
Release 5.0
13 May 2008
Copyright © 2008, Nortel Networks
.