Nortel Networks 1000M - Manual (Page 426)

426 Changing preprogrammed data
CODE aaaa Enter access code prompt (aaaa)
AAAA xx Enter the new access code prompt (AAAA)
CODE Return to REQ
REQ END End program
To remove all access codes, enter the following commands:
REQ OUT Action request
TYPE FFC FFC = Flexible feature codes
CUST 0-31 Customer Number
FFCT YES (NO) FFC Confirmation tone
ALL YES Remove all access codes
CODE Return to REQ
REQ END End program
Creating, changing, and removing model telephones
If you need a model telephone different from the default models provided in
Small System software, use overlays to design your own models using the
information in
Table 136 "Design model telephones" (page 426) .
Table 136
Design model telephones
Task Overlay (LD)
Create your own model telephones:
Analog telephones
(500/2500-type telephones) 10
Digital telephones 11
Get information on model telephones 20
(printout)
If you require additional assistance when creating your own model
telephones and trunks, refer to the system software NTPs that are shipped
with every system.
Creating analog telephone models
You must enter the following information in LD 10 to create an analog
(500/2500- type) telephone model:
Nortel Communication Server 1000
Communication Server 1000M and Meridian 1 Small System Installation and Commissioning
NN43011-310 01.04 Standard
Release 5.0 13 May 2008
Copyright © 2008, Nortel Networks
.