Nortel Networks 1000M - Manual (Page 282)

282 Installing software
4 Set the system time and date.
Note: The Time and Date prompt appears only when the Install
Setup Program detects a system Year Date that is not in the
range of 1995–2095. The responses shown below are examples
of how to enter the system Time and Date:
Enter new time (hh/mm/ss)
08:00:00
Enter new date (yy/mm/dd)
95/05/01
08:00:00 -- 95/05/01 is the new system time and date
y
5 In the Software Installation Main Menu, select option 2 to install
software on the Main Cabinet or Chassis.
Software Installation Main Menu:
1. Media Gateway/IPExpansion Cabinet
2. Call Server/Main Cabinet
[q]uit, [h]elp or [?], - redisplay
Enter selection: 2
6 The main menu for software installation on a Main Cabinet or
Chassis displays.
Select option 1 for a new installation.
If you are installing from a PC Card, select item 4.
Call Server/Main Cabinet Software Installation Main
Menu:
1. New Install or Upgrade from Option 11/11E - From
Software DaughterBoard
2. System Upgrade
3. Utilities
4. New System Installation - From Software Delivery
Card
[q]uit, [p]revious, [m]ain menu, [h]elp or [?],
- redisplay
Enter selection: 1
7 Indicate whether the system has a Signaling Server.
Note: A CS 1000M system must contain at least one Signaling
Server, so the answer in this case is yes.
Does this System have a Signaling Server?
(y/n/[a]bort):
*** NOTE: The following prompts require information
on the Keycode Data Sheet.
Please have it available. ***
Enter selection: y
Nortel Communication Server 1000
Communication Server 1000M and Meridian 1 Small System Installation and Commissioning
NN43011-310 01.04 Standard
Release 5.0 13 May 2008
Copyright © 2008, Nortel Networks
.