Nortel Networks 1000M - Manual (Page 462)

462 Central Answering Position
• an attendant call through a Centralized Attendant Service or Primary
Rate Access/Integrated Services Digital Network trunk
• an ACD call
• a data call
• a parked call
• a call-waiting call
• a held call
• an operator callback or toll operator break-in call
• Make Set Busy active
• Do Not Disturb active
External trunks cannot perform priority override. They can be overridden
only if they are the undesired party of an established call being broken into.
Feature interactions
Multiple-Party Operation: When a consultation call is made on a set
equipped with Priority Override, a control digit has to be dialed from the set
to perform a recall and return the call on hold.
Override: Priority Override, when activated, replaces normal Override.
Digit Display: Once Priority Override has been performed on a set, its digit
display shows the DN of the overriding set.
Feature programming
To activate this feature, use the following task list in LD 10, LD 11, LD 14,
LD 15, LD 16, and LD 57.
LD 10: Configuring Forward Camp-on/Priority Override on a set
Prompt Response Description
REQ: CHG Modify the existing data.
TYPE: 500 500 M 500/2500 telephone data block.
Model set.
Nortel Communication Server 1000
Communication Server 1000M and Meridian 1 Small System Installation and Commissioning
NN43011-310 01.04 Standard
Release 5.0 13 May 2008
Copyright © 2008, Nortel Networks
.