Nortel Networks 1000M - Manual (Page 33)

Cables and wires 33
• NT7D16 Data Access Card (DAC)
• NTAG26 Extended Multi-frequency Receiver (XMFR) card
Telephones and attendant consoles
Supported telephones are as follows:
• Analog (500/2500-type) telephones with or without message waiting
lamps.
• Meridian Digital Telephones (M2006, M2008, M2216, M2616).
• M2616 or M2216 Central Answering Position (CAP). This telephone
must be equipped with an ACD LCD display in order to function as a
CAP telephone.
• Meridian 2250 (TCM) attendant consoles.
• IP Phones (IP Phone 2001, IP Phone 2002, IP Phone 2004, and IP
Phone 2007)
• IP Softphone 2050
Converged Desktop
The Converged Desktop is a TDM or IP set configured to access Multimedia
Communication Server (MCS) 5100 multimedia applications through a
Session Initiation Protocol (SIP) Virtual Trunk.
CS 1000M Small Systems support the Converged Desktop.
Cables and wires
Glass fiber optic cable requirements
The Option 11C fiber optic link for distances up to 3 km (1.8 mi) uses the
industry standard 62.5/125 µm glass multi-mode duplex cable or 9/125 µm
glass Single Mode duplex cable with ST-type connectors.
The type of cable used depends on the type of installation and any local
building codes.
Table 3 "Multi and Single-mode glass optical cable requirements for
distances up to 3 km (1.8 mi)" (page 34)
lists the optical requirements for
glass fiber optic cable used with the Option 11C.
Nortel Communication Server 1000
Communication Server 1000M and Meridian 1 Small System Installation and Commissioning
NN43011-310 01.04 Standard
Release 5.0 13 May 2008
Copyright © 2008, Nortel Networks
.