Nortel Networks 1000M User Manual
Page 425
Removing numbering plan conflicts
425
Changing or removing the preprogrammed night number
If you wish to change or remove the night number, use LD 15. (For some
countries, the default value of the night number is listed in
numbering plan: important extension numbers" (page 377)
.)
LD 15
REQ
CHG
where CHG = Change
TYPE
CDB
where CDB = Customer Data Block
CUST
x
where "x" = Customer number
NIT1
or
bbbb
where"bbbb" = the new extension number (DN)
X aaaa
where "aaaa" = the current night number (the
night number now removed)
Conflicts with Flexible Feature Codes
If the preprogrammed Flexible Feature Codes interfere with the programming
required for the Small System, use LD 57 to remove the data from the
system. (For some countries, default FFCs are listed in
LD 57
To change one or more access codes, enter the following commands:
REQ
CHG END
Change or end
TYPE
FFC
FFC = Flexible feature codes
CUST
0-31
Customer Number
FFCT
YES (NO)
FFFC Confirmation tone
CODE
aaaa
Enter access code prompt (aaaa)
AAAA
xx
Enter the new access code prompt (AAAA)
CODE
Return to REQ
REQ
END
End program
To remove one access code, enter the following commands:
REQ
OUT
Action request
TYPE
FFC
FFC = Flexible feature codes
CUST
0-31
Customer Number
FFCT
YES (NO)
FFC Confirmation tone
ALL
NO
Remove specific access code
Nortel Communication Server 1000
Communication Server 1000M and Meridian 1 Small System Installation and Commissioning
NN43011-310
01.04
Standard
Release 5.0
13 May 2008
Copyright © 2008, Nortel Networks
.