Installing a new cabinet system, Procedure 2 new system installation – Nortel Networks 1000M User Manual
Page 76
76
Installing the Cabinet system
Ensure you read and complete all instructions contained in the prior
chapters of this guide and in the chapters on system and site planning in
Communication Server 1000M and Meridian 1 Small System Planning and
Engineering (NN43011-220).
CAUTION
CAUTION WITH ESDS DEVICES
Wear the antistatic wrist strap provided in the bottom of the
cabinet before handling the power supplies or other circuit cards.
Static electricity can damage the components of power supplies
and circuit cards.
Installing a new Cabinet system
Follow the steps in
Procedure 2 "New system installation" (page 76)
to
install a new CS 1000M Cabinet or Meridian 1 PBX 11C Cabinet system.
Complete each step as described before proceeding with the next step.
References may be made to other chapters in this guide in order to provide
additional information.
Procedure 2
New system installation
Step
Action
For a CS 1000M Cabinet system, install the Signaling Server. Refer
to Signaling Server Installation and Commissioning (NN43001-312) for
instructions.
1
Install the main cabinet.
a. Mount the cabinets as described in
.
b. Remove the drip tray from each cabinet to expose the cable
routing grooves at the bottom rear of the cabinet.
c. Install the cabinet ground wire for the main cabinet as described
in
"Installing the system ground" (page 127)
.
d. Install the power supply as described in
supplies for the Cabinet system" (page 137)
.
e. Install the reserve power supply if required. Refer to
and connecting reserve power supplies for the Cabinet system"
(page 147)
.
f.
Install the NTDK20 Small System Controller (SSC) card and
daughterboard(s). For a system without fiber or IP expansion,
refer to
"Installing Small System Controller cards on stand-alone
. For a system with fiber expansion, refer
Nortel Communication Server 1000
Communication Server 1000M and Meridian 1 Small System Installation and Commissioning
NN43011-310
01.04
Standard
Release 5.0
13 May 2008
Copyright © 2008, Nortel Networks
.