Nortel Networks 1000M - Manual (Page 32)

32 Cabinet system equipment
Table 2
Common equipment packs supported in Cabinet system IP cabinets
Pack Daughterboard Supported application
1.5 MB TMDI (NTRB21) CC (NTAK20) downloadable DCH
clock controller (stratum 3/4)
2.0 MB DTI (NTAK20) n/a clock controller (stratum 3/4)
2.0 MB PRI (NTAK10) n/a clock controller (stratum 3/4)
DCH
2.0 MB PRI (NTBK50) DDCH (NTBK51)
CC (NTAK20)
downloadable DCH
clock controller (Stratum 3/4)
MISP (NTBK22) CC (NTAK20) MISP BRI processor
clock controller (stratum 3/4)
SDI_DCH (NTAK02) n/a only DCH is supported; ESDI,
AML, TTY are not supported
Card Option Mail is not supported n/a n/a
Peripheral equipment cards
The following Intelligent Peripheral Equipment (IPE) cards can be used
in main and IP expansion cabinets:
• NT1R20 Off-Premise Station (OPS) analog line card
• NT8D02 digital line card
• NT8D03 analog line card
• NT8DO9 analog message waiting line card
• NT8D14 Universal Trunk card
• NT8D16 Digitone Receiver card
• NT8D15 E&M Trunk card
• NT5D14 lineside T1 card
• NT5D34 lineside E1 card
• NT5K02 (International) analog line card
• NT5K18 (International) 8 Port COT/PPM trunk card
• NT5K17 (International) 8 Port DID trunk card
• NT5K19 (International) 4 Port 2W/4W E&M, RAN, Paging AC15 trunk
card
• NT5K21 (International) Multi Frequency Compelled Sender/Receiver
card
• NT5K36 (International) 4 Port German DID/DOD trunk card
Nortel Communication Server 1000
Communication Server 1000M and Meridian 1 Small System Installation and Commissioning
NN43011-310 01.04 Standard
Release 5.0 13 May 2008
Copyright © 2008, Nortel Networks
.