Nortel Networks 1000M User Manual
Page 423
Removing numbering plan conflicts
423
LD 11
REQ
OUT
TYPE
2008
TN
10 XX
where "XX" = a value of 0,1,2,8,9, or 10
Obtaining the use of Meridian Mail ACD queues
The Meridian Mail feature also uses a number of ACD queues in the Small
System. See
"Conflicts with ACD queues" (page 423)
for information on
how to remove this data from the system.
Conflicts with ACD queues
The Small System has preprogrammed ACD queues for Meridian Mail, the
Central Answering Position, and general purpose ACD. (For some countries,
preprogrammed ACD queues are listed in
plan: important extension numbers" (page 377)
.) To remove these values,
use LD 23.
Note: Before you remove this data from the system, make sure that all
ACD agent information is removed from the queue.
In LD 23, respond to the prompts as follows:
LD 23
REQ
OUT
TYPE
ACD
CUST
0
ACDN
XXXX
where "XXXX" = value of ACD queue
Repeat for each ACD queue you wish to remove.
Conflicts with Call Park extension numbers
System call park extension numbers are preprogrammed for the Central
Answering Position. (For some countries, the default call park extensions
are listed in
Table 76 "Default numbering plan: important extension
.) To remove this data from the system, load LD 50
and respond to the prompts as follows:
LD 50
REQ
OUT
TYPE
CPK
Nortel Communication Server 1000
Communication Server 1000M and Meridian 1 Small System Installation and Commissioning
NN43011-310
01.04
Standard
Release 5.0
13 May 2008
Copyright © 2008, Nortel Networks
.