Nortel Networks 1000M User Manual
Page 246
246
Installing and connecting SDI and Ethernet network interfaces
Figure 120
SDI cable connection on the fiber expansion chassis
NTAK02 SDI/DCH card
In the Cabinet system, the NTAK02 SDI/DCH card can be used in the main
and IP expansion cabinets. In a Chassis system, only the chassis supports
the NTAK02 SDI/DCH card.
You can configure this card to support ports for the following:
•
two SDI and two DCHI
•
one SDI, one DCHI, two ESDI
•
four ESDI
Note: Only the DCH functionality is supported in IP Expansion cabinets.
ESDL, AML and TTY are not supported.
You can use the NTAK02 ports to access overlay software. Define these
ports in the configuration database as the SDI logical type.
An NTAK19FB 4-port SDI cable is designed for use with the NTAK02
circuit card. However, you can use an NE-A25B 25-pair cable to extend
the connections to the cross-connect terminal. See
Nortel Communication Server 1000
Communication Server 1000M and Meridian 1 Small System Installation and Commissioning
NN43011-310
01.04
Standard
Release 5.0
13 May 2008
Copyright © 2008, Nortel Networks
.