Nortel Networks 1000M - Manual (Page 395)

Model telephones 395
Feature
Key
number
position
Key
number
position Feature
Auto Dial 9 1 Extend
Auto Dial 8 0 ACD Queue (7700)
* This key is used as a Hotline to connect to the office paging system. Assign it
with the paging route access code and define it when you activate the telephone.
Note: With the M2616 CAP you must use an ACD character display. In
the system software, the Extend key is actually called a Transfer key;
the Consult/Join key is called a Conference key; and the Add key is
called a No Hold Conference key.
General business telephone models
M2000 series telephones
The M2000 series telephones — M2112, M2018, M2317, M2009, and
M3000 — are limited to a combined total of 128 model telephones. (In other
words, there can be no more than a combined total of 128 different models
for all the M2000 series telephones.)
It is up to you to make sure that the model associated with the telephone
you are activating is predefined. You must select the model associated with
the telephone or the telephone will not work.
M2317 model 20
Intended use: Two-line general business telephone with display
Assigned Class of Service options: FND/GPUA/LND/MWD/ADD/FBD
Table 101
M2317 model 20
Feature
Key number
position
Key number
position Feature
— — 5 Auto Dial
Auto Dial 10 4 Auto Dial
Auto Dial 9 3 Auto Dial
Auto Dial 8 2 Auto Dial
Auto Dial 7 1 DN
Auto Dial 6 0 DN
Nortel Communication Server 1000
Communication Server 1000M and Meridian 1 Small System Installation and Commissioning
NN43011-310 01.04 Standard
Release 5.0 13 May 2008
Copyright © 2008, Nortel Networks
.