Nortel Networks 1000M - Manual (Page 191)

Installing the NTDK20 SSC card on IP expansion cabinets and chassis 191
3. Do not connect the SSC faceplate LED.
To install the 100BaseT single-port daughterboard, refer to Procedure 27
"Installing the 100BaseT daughterboards on the SSC card" (page 182) .
To install the 100BaseF single-port daughterboard, refer to Procedure 28
"Installing the 100BaseF IP expansion daughterboard on the SSC card on
the Main Cabinet or Chassis" (page 187)
.
Note: When both Fiber and IP Expansion daughterboards coexist in a
system, configure the Fiber Expansion daughterboard as expansions 1
and 3 and the IP Expansion daughterboard as expansions 2 and 4.
Nortel Communication Server 1000
Communication Server 1000M and Meridian 1 Small System Installation and Commissioning
NN43011-310 01.04 Standard
Release 5.0 13 May 2008
Copyright © 2008, Nortel Networks
.