Nortel Networks 1000M - Manual (Page 386)

386 Preprogrammed data
FFC prompt FFC Definition
C6DS *70 6 Party Conference Code
HOLD #4 Permanent Call Hold
MNTC *43 Maintenance Access Code
PUGR *71 Pick-Up Group Code
RDLN *72 Last Number Redial
*73 Store Last Number Redial
RGAA *74 Ring Again Activate
RGAD *75 Ring Again Deactivate
RGAV *77 Ring Again Verify
SPCC #2/*80 Speed Call Controller Code
SPCU #3/*81 Speed Call User Code
SSPU *89 System Speed Call User Code
SDI ports
The minimum system port configuration for the Small System is 3 SDI ports,
all of which can be found on the Small System’s NTDK20 SSC card.
You can obtain additional ports by installing an NTAK02 SDI/DCH circuit
card. The SDI/DCH card has 4 serial I/O ports with three possible
configurations:
• 2 asynchronous ESDI ports with 2 DCHI ports
• 2 synchronous ESDI ports, or
• 2 SDI ports.
Table 91 "Preconfigured SDI ports" (page 386) shows the default SDI port
configuration. The value for "XX" is set on the faceplate of the Cabinet
system’s CPU/CONF circuit card or the Chassis system’s SSC circuit card.
Table 91
Preconfigured SDI ports
TTY Number Card Port Use Configuration
0 0 0 MTC/SCH/BUG XX/8/1/NONE
1 0 0 MTC/SCH/BUG 1200/8/1/NONE
2 0 1 MTC/SCH/BUG 1200/8/1/NONE
8 10 0 LSL 1200/8/1/NONE
9 10 1 CMS 4800
Nortel Communication Server 1000
Communication Server 1000M and Meridian 1 Small System Installation and Commissioning
NN43011-310 01.04 Standard
Release 5.0 13 May 2008
Copyright © 2008, Nortel Networks
.