Nortel Networks 1000M User Manual
Page 124
124
Connecting the chassis expander to the chassis
(labeled as Expansion Cabinet DS-30/CE-MUX Conn) to the
CE-MUX connector at the back of the Chassis Expander.
Note: To ensure correct usage, one end of the NTDK95 cable is
designated to connect to the expansion cabinet.
3
Tighten the screws on the connectors.
4
Connect the other NTDK95 cable (non-labeled side) to the DS-30X
connector at the back of the Chassis and labeled side of NTDK95
(labeled as Expansion Cabinet DS-30/CE-MUX Conn) to the DS-30X
connector at the back of the Chassis Expander.
5
Tighten the screws on the connectors.
Note: The Chassis Expander Cable Kit (NTDK89) contains two
NTDK95 cables.
shows the
chassis and chassis expander connected with the two NTDK95
cables.
Nortel Communication Server 1000
Communication Server 1000M and Meridian 1 Small System Installation and Commissioning
NN43011-310
01.04
Standard
Release 5.0
13 May 2008
Copyright © 2008, Nortel Networks
.