Nortel Networks 1000M User Manual
Page 173
Installing the NTDK20 SSC card on the Main Cabinet or Chassis
173
5
Insert the plug in its designated connector on the daughterboard.
Once inserted, lock the connector in place by turning it a half turn
clockwise. Refer to
Figure 80 "Glass fiber-optic cable connection on
dual-port daughterboard" (page 173)
6
Repeat the steps above for the remaining connector and plug.
7
Route the fiber cables through the SSC cable router on the SSC
card. Refer to
Figure 80 "Glass fiber-optic cable connection on
dual-port daughterboard" (page 173)
for location of the cable router.
8
Insert the SSC card into slot 0 of the Main Cabinet or Chassis. Lock
card into faceplate latches.
9
Route the cables through the SSC Cable Routing Guide under the
main cabinet as shown in
Figure 81 "Cable Routing Guide under
.
—End—
Figure 80
Glass fiber-optic cable connection on dual-port daughterboard
Nortel Communication Server 1000
Communication Server 1000M and Meridian 1 Small System Installation and Commissioning
NN43011-310
01.04
Standard
Release 5.0
13 May 2008
Copyright © 2008, Nortel Networks
.