Nortel Networks 1000M User Manual
Page 237
237
Installing and connecting SDI and
Ethernet network interfaces
Contents
This section contains information on the following topics:
"Modem setup requirements" (page 238)
"Cable connections and adapters" (page 239)
"Installing and connecting SDI ports" (page 241)
"NTDK23, NTDK25, and NTDK80 Fiber Receiver cards" (page 244)
"NTAK02 SDI/DCH card" (page 246)
"Installing and connecting an Ethernet cable" (page 252)
"Cabinet system: IP expansion 10BaseT port" (page 253)
"Chassis system Ethernet connection" (page 255)
Introduction
This chapter contains modem setup requirements and the following
procedures for connecting communication devices to the Small Systems:
•
Procedure 43 "Connecting SDI ports on the SSC card" (page 242)
•
Procedure 44 "Connecting SDI ports to the Fiber Receiver card" (page
245)
•
Procedure 45 "Setting up the terminal" (page 249)
•
Procedure 46 "Connecting the Ethernet cable to the Cabinet system"
(page 254)
Nortel Communication Server 1000
Communication Server 1000M and Meridian 1 Small System Installation and Commissioning
NN43011-310
01.04
Standard
Release 5.0
13 May 2008
Copyright © 2008, Nortel Networks
.