Nortel Networks 1000M - Manual (Page 143)

Power supplies 143
4 If a rectifier is to be installed with the system, install it using the
instructions supplied with the rectifier.
5 Feed one end of the DC power cable up through the card guide and
insert it into the connector on the right side of the DC power supply.
See
Figure 62 "NTDK72 DC power cable connection" (page 143) .
Figure 62
NTDK72 DC power cable connection
6 Route the rest of the power cable down through the opening at the
bottom of the cabinet as shown in
Figure 63 "Power cord routing"
(page 144) .
Nortel Communication Server 1000
Communication Server 1000M and Meridian 1 Small System Installation and Commissioning
NN43011-310 01.04 Standard
Release 5.0 13 May 2008
Copyright © 2008, Nortel Networks
.