Nortel Networks 1000M - Manual (Page 36)

36 Cabinet system equipment
Table 5
AC power cord kits
Country or region
AC Power
Cord
Voltage
Rating
Current
Rating Plug Type
North America A0379412 250 V 10 A NEMA 6-15P
Argentina A0814961 250 V 10 A IRAM 2073
North America NTTK14 125 V 13 A NEMA 5-15P
Australia/New Zealand NTTK15 250 V 10 A AS3112
Europe NTTK16 250 V 10 A CEE(7)VII
Switzerland NTTK17 250 V 10 A SEV 1011
UK/Ireland NTTK18 250 V 10 A BS1363
Denmark NTTK22 250 V 10 A AFSNIT
Miscellaneous items
The following is a list of typical miscellaneous items that can be used as
part of the system installation. Quantities needed depend on the site and
customer requirements:
• QUA6 Power Failure Transfer Units (PFTU) to transfer lines during a
power or system failure
• NTBK80 grounding block
• modems or Data Communication Equipment (DCE) for remote access
to the system
• on-site Data Terminating Equipment (DTE) or teletypewriter (TTY)
terminal for accessing the system
• connecting blocks for the cross-connect terminal
• transformers and centralized power supplies for items such as digit
displays on telephones
• optional equipment such as music sources, RAN machines, paging
equipment, and CDR devices
• NT1R20 Off-Premise Station Analog Line Card. Each card has eight
ports. Each of the units on the card can be configured to be operated as
an OPS or in an On-Premise (ONS) configuration
• additional Modem Eliminator (NULL Modem without hardware
handshaking) A0601397 converter may be required to interface the
DTE to the system
• NTTK41 EMC grounding clip is required, for EMC compliance, on the
front stiffener rail of cabinets using 100BaseT connections. Refer to
Figure 15 "EMC grounding clip on the cabinet" (page 37) .
Nortel Communication Server 1000
Communication Server 1000M and Meridian 1 Small System Installation and Commissioning
NN43011-310 01.04 Standard
Release 5.0 13 May 2008
Copyright © 2008, Nortel Networks
.