Nortel Networks 1000M - Manual (Page 427)

Creating, changing, and removing model telephones 427
LD 10
REQ NEW
TYPE 500 M
MODL YYY where "YYY" = the model number of the
telephone that you are creating
Enter responses to the remaining prompts in order to complete the new
model. Refer to the system software guides for a complete list of prompts
and possible responses.
Modifying analog model telephones
If you want to modify an analog telephone, use LD 10 and type in the
following commands on the TTY.
LD 10
REQ CHG
TYPE 500 M
MODL YYY where "YYY" = the model number of the
telephone that you are modifying
For more information about LD 10 and its associated prompts and
commands, refer to the system software NTPs that are shipped with the
system.
Creating digital model telephones
When you create model telephones for digital telephones, you must program
key 0 with a function that can act as a prime extension number or its
equivalent. This includes telephones that are programmed to have Single
Call Ringing (SCR), Multiple Call Ringing (MCR), Single Call Non-Ringing
(SCN), Multiple Call Non-Ringing (MCN), and Automatic Call Distribution
(ACD).
For ACD telephones, the model telephone defines the ACD queue. To
define the extension number, you must enter the ID number of the agent
or the Central Answering Position.
You must enter the following information in LD 11 in order to create a digital
telephone model.
Nortel Communication Server 1000
Communication Server 1000M and Meridian 1 Small System Installation and Commissioning
NN43011-310 01.04 Standard
Release 5.0 13 May 2008
Copyright © 2008, Nortel Networks
.