Procedure 46 "connecting the ethernet cable to the – Nortel Networks 1000M User Manual
Page 254
254
Installing and connecting SDI and Ethernet network interfaces
Figure 122
J7 Jumper Plug location on NTDK20 SSC card
Procedure 46
Connecting the Ethernet cable to the Cabinet system
Step
Action
1
Insert the 50-pin end of the cable into the cable connector on the left
side of the retaining bar. See
Figure 121 "Ethernet port location on
2
Route the cable through the fifth cable groove from the left side.
The Ethernet cable is a 50-pin amphenol to 15-pin AUI adaptor cable
(part number for Ethernet cable NTDK27 A06030723). This provides
a standard Media Access Unit (MAU) attachment point.
Nortel Communication Server 1000
Communication Server 1000M and Meridian 1 Small System Installation and Commissioning
NN43011-310
01.04
Standard
Release 5.0
13 May 2008
Copyright © 2008, Nortel Networks
.