Nortel Networks 1000M - Manual (Page 428)

428 Changing preprogrammed data
LD 11
REQ NEW
TYPE 2XXX M or
3000 M
where "XXX" = allowed telephone types
MODL YYY where "YYY" = the model number
of the telephone that you are
creating (between 1–127)
Enter the responses to the remaining prompts in order to complete the new
model. Refer to the system software NTPs for a complete list of prompts
and possible responses.
Modifying digital model telephones
If you want to modify a digital telephone, load LD 11 and enter the following
commands on the TTY:
LD 11
REQ CHG
TYPE 2XXX M or
3000 M where "XXX" = allowed
telephone types
MODL YYY where "YYY" = the model number
of the telephone that
you are modifying
For more information about LD 11 and its associated prompts and
commands, refer to the system software NTPs that are shipped with the
system.
Printing model information
To print information about model telephones, use LD 20.
Analog telephones
LD 20
REQ PRT
TYPE 500 M
MODL YYY where "YYY" = the telephone model
number. If you want to print all of the
models for this telephone type, leave this
value blank.
Nortel Communication Server 1000
Communication Server 1000M and Meridian 1 Small System Installation and Commissioning
NN43011-310 01.04 Standard
Release 5.0 13 May 2008
Copyright © 2008, Nortel Networks
.