Nortel Networks 1000M - Manual (Page 3)

3
Revision history
May 2008
Standard 01.04. This document is up-issued to change the ’Adding a
chassis expander’ procedure.
November 2007
Standard 01.03. This document is up-issued to updated to show that one
end of the NTDK95 cable is designated to connect to the expansion cabinet.
June 2007
Standard 01.02. This document is up-issued to remove the Nortel Networks
Confidential statement.
May 2007
Standard 01.01. This document is issued to support Nortel Communication
Server 1000 Release 5.0. This document is renamed Communication
Server 1000M and Meridian 1 Small System Installation and Commissioning
(NN43011-310) and contains information previously contained in the
following legacy document, now retired:Communication Server 1000M and
Meridian 1 Small System: Installation and Configuration (553-3011-210).
Descriptions and procedures pertaining to IP applications in this document
are provided for continuity for customers remaining on Communication
Server Release 4.5.
A stand-alone IP Trunk (ITG Trunk) configuration is the only IP application
supported on the Meridian 1 Option 11C platform in Communication Server
1000 Release 5.0. For information on software-only upgrades, refer to
Communication Server 1000M and Meridian 1 Small System Software
Upgrades (NN43011-459).
Systems described within this document that are configured with IP Phones
or Signaling Servers using Communication Server 1000 Release 4.5 and
want to upgrade to Communication Server 1000 Release 5.0 must be
Nortel Communication Server 1000
Communication Server 1000M and Meridian 1 Small System Installation and Commissioning
NN43011-310 01.04 Standard
Release 5.0 13 May 2008
Copyright © 2008, Nortel Networks
.