Nortel Networks 1000M User Manual
Page 75
75
Installing the Cabinet system
Contents
This section contains information on the following topics:
"Installing a new Cabinet system" (page 76)
"Expanding an existing system" (page 81)
"Reconfiguring a system" (page 82)
"Expanding an existing system" (page 81)
"Expansion cabinet as a power shelf for auxiliary processors" (page 87)
Introduction
WARNING
Before a Small System can be installed, a network assessment
must be performed and the network must be VoIP-ready.
If the minimum VoIP network requirements are not met, the system
will not operate properly.
For information on the minimum VoIP network requirements and
converging a data network with VoIP, refer to Converging the Data
Network with VoIP Fundamentals (NN43001-260).
Use this chapter when installing a new system, adding expansion cabinets
to an existing system, or reconfiguring existing cabinets to accommodate an
additional expansion cabinet. It also describes the procedure for adding a
cabinet to be used as a stand-alone power shelf for auxiliary processor units.
Nortel Communication Server 1000
Communication Server 1000M and Meridian 1 Small System Installation and Commissioning
NN43011-310
01.04
Standard
Release 5.0
13 May 2008
Copyright © 2008, Nortel Networks
.