Danger – Nortel Networks 1000M User Manual

Page 118

118

Mounting the chassis

•

eight 25 mm (1 in.) #12 wood screws supplied in the bracket kit (or other
appropriate fasteners) to fasten the wall shelf brackets to the wall

•

one 20 mm (3/4 in.) piece of plywood fastened to the wall

The NTTK11 bracket kit contains all of the above items, with the exception
of the equipment layout plan and the plywood.

DANGER

A chassis is 13.5 kg (30 lb) with circuit cards installed. Make sure
that you fasten the equipment securely to the wall. Use fasteners
designed to hold securely to the type of surface that will support
the equipment. When using 20 mm (3/4 in.) plywood, or other
similar material as a backboard, make sure you attach it directly to
the wall studs in a minimum of six places.

Refer to

Figure 50 "Typical layout for installing the chassis on a wall in a

horizontal position" (page 119)

for guidelines on how to position system

components.

Nortel Communication Server 1000

Communication Server 1000M and Meridian 1 Small System Installation and Commissioning

NN43011-310

01.04

Standard

Release 5.0

13 May 2008