Nortel Networks 1000M User Manual
Page 289
Installing software in a new system
289
IP PEER H.323 TRUNKS : 0 0
SIP Access Ports :
0 0
M3900 Language Set :
1.Global 10 languages
Is this correct?
(y/n/[a]bort):
y
n
a
If the response was NO, go to
If the response was YES, go to
22
Indicate if you wish to enable Automatic Centralized Software
Upgrade.
Enable Automatic Centralized Software Upgrade?
(y/n/[a]bort):
23
Enter the keycodes from the Keycode Data Sheet.
Enter new Keycodes:
Key 1:
Key 2:
Key 3:
xxxxxxxx
yyyyyyyy
zzzzzzzz
After you enter the last keycode, the system validates the keycodes
and displays a message indicating whether or not the validation
succeeded. Follow the instructions given below.
Keycode validation successful.
***WARNING*** A system restart will be invoked as part
of the software installation process.
If the successful message appears, go to
.
If the unsuccessful message appears, repeat this step (
).
After three unsuccessful keycode validation attempts, the following
message appears:
Keycode validation unsuccessful.
Installation aborted...returning to main menu.
24
Complete the software installation.
Are you sure you wish to perform the installation?
(y/n/[a]bort):
y
n
a
If the response was NO, go to
Nortel Communication Server 1000
Communication Server 1000M and Meridian 1 Small System Installation and Commissioning
NN43011-310
01.04
Standard
Release 5.0
13 May 2008
Copyright © 2008, Nortel Networks
.