3 copy process, Press either, Configuring axes chapter 3 – Rockwell Automation 8520-ARM2 9/Series CNC AMP Reference Manual Documentation Set User Manual
Page 80: Axis parameters
Configuring Axes
Chapter 3
3-16
Use the Copy Process option to copy the AMP parameters from one
process to another.
To copy a process:
1.
Press
[F5]
to pull down the F5--Process menu.
2.
Press
[C]
to select the Copy Process option.
The following screen appears:
Proj:
AMPTEST
Appl:
AMP
Util:
Edit
F2-Project F3-Application F4-Utility
F5-Configuration
F1-File
F2-Axis
F3-Options
F4-Quick Edit!
F5-Process
Type : Lathe
AXIS: X
File :
TEST
-- Axis Parameters --
Axis One’s Name
:
X
Axis Two’s Name
:
Y
Axis Three’s Name
:
Z
Axis Four’s Name
:
U
Axis Five’s Name
:
V
Axis Six’s Name
:
W
Axis Seven’s Name
:
C
Axis Eight’s Name
:
A
Axis Nine’s Name
:
B
Axis Ten’s Name
:
S
Axis Eleven’s Name
:
S
Axis Twelve’s Name
:
S
Axis Thirteen’s Name
:
S
Page 1 of 4
P1:
Copy from Process :
Process [1]:
Process [2]:
- Active
- High
(1)
- Inactive - High
(2)
3.
Press either
[1]
or
[2]
to select the process you want to copy from.
.
The following screen appears:
Proj:
AMPTEST
Appl:
AMP
Util:
Edit
F2-Project F3-Application F4-Utility
F5-Configuration
F1-File
F2-Axis
F3-Options
F4-Quick Edit!
F5-Process
Type : Lathe
AXIS: X
File :
TEST
-- Axis Parameters --
Axis One’s Name
:
X
Axis Two’s Name
:
Y
Axis Three’s Name
:
Z
Axis Four’s Name
:
U
Axis Five’s Name
:
V
Axis Six’s Name
:
W
Axis Seven’s Name
:
C
Axis Eight’s Name
:
A
Axis Nine’s Name
:
B
Axis Ten’s Name
:
S
Axis Eleven’s Name
:
S
Axis Twelve’s Name
:
S
Axis Thirteen’s Name
:
S
Page 1 of 4
P1:
Copy from process n to Process...
Process [1]:
Process [2]:
- Active
- High
(1)
- Inactive - High
(2)
4.
Press either
[1]
or
[2]
to select the process you want to copy to.
3.9.3
Copy Process