Rockwell Automation 8520-ARM2 9/Series CNC AMP Reference Manual Documentation Set - Manual (Page 565)

Chapter
30
30-1
Cylindrical/Virtual C Parameters
These parameters specify the configuration of the axes during cylindrical
interpolation operations on a mill or virtual C operations on a lathe. Refer
to your programming and operation manual for more information. If you
are using the multi-spindle feature, the virtual C parameters apply only to
the Spindle 1.
The workstation displays these screens when you select the
“Cylindrical/Virtual C Parameters” group from the main menu screen:
Proj: AMPTEST Appl: AMP Util: Edit
F2-Project F3-Application F4-Utility F5-Configuration
- Cylindrical/Virtual C Parameters -
Virtual C Rotary Axis : C
End Face Milling Axis : Y
End Face Milling Incr Axis : V
End Face Axis Integrand Name : J
Axis Along Center Line : Z
Feed Axis Park Location : Nearest To Machine Zero
Auto Home On Virtual C Entry : Yes
Proj: AMPTEST Appl: AMP Util: Edit
F2-Project F3-Application F4-Utility F5-Configuration F1-File F2-Axis F3-Options F4-Quick Edit! F5-Process
Type : Mill AXIS: X - linear P1: File : TEST
- Cylindrical/Virtual C Parameters -
Cylindrical Feed Axis Name : Z
Cylindrical Park Axis Name : Y
Cylindrical Linear Axis Name : X
Cylindrical Rotary Axis Name : A
Rotary Center Feed Coordinate : 0.00000 mm
Rotary Center Park Coordinate : 0.00000 mm
Feed Axis Park Location : Nearest To Machine Zero
When you select control type “Mill,” these parameters are displayed: When you select control type “Lathe,” these parameters are displayed:
F1-File F2-Axis F3-Options F4-Quick Edit! F5-Process
Type : Lathe AXIS: X - linear P1: File : TEST
These parameters are not available for 9/230, and grinder applications.
30.0
Chapter Overview