Rockwell Automation 8520-ARM2 9/Series CNC AMP Reference Manual Documentation Set - Manual (Page 262)

Jog Parameters
Chapter 8
8-4
Function
This parameter sets the resolution of the HPG (distance the axes travels per
HPG pulse) when performing an HPG jog with on
the MTB panel set to the MEDL X10.
Axis Parameter
Number
Axis Parameter
Number
(1) [1356] (7) [7356]
(2) [2356] (8) [8356]
(3) [3356] (9) [9356]
(4) [4356] (10) [10356]
(5) [5356] (11) [11356]
(6) [6356] (12) [12356]
Range
Pulse Count Multiplier - Low value to Pulse Count Multiplier - High value
The maximum and minimum values that may be set for this parameter are
dependant on the value set for the parameters “Pulse Count Multiplier -
Low” and “Pulse Count Multiplier - High.”
Notes
You must set this parameter independently for each axis.
The default setting for on the pushbutton MTB
panel is LOW X1.
8.1.2
Pulse Count Multiplier-Med