Rockwell Automation 8520-ARM2 9/Series CNC AMP Reference Manual Documentation Set - Manual (Page 263)

Jog Parameters
Chapter 8
8-5
Function
This parameter sets the resolution of the HPG (distance the axes travels per
HPG pulse) when performing an HPG jog with on
the MTB panel set to MED X100.
Axis Parameter
Number
Axis Parameter
Number
(1) [1357] (7) [7357]
(2) [2357] (8) [8357]
(3) [3357] (9) [9357]
(4) [4357] (10) [10357]
(5) [5357] (11) [11357]
(6) [6357] (12) [12357]
Range
Pulse Count Multiplier- Med value to 127.00000 mm or 360.00000 degrees
or
Pulse Count Multiplier - Med value to 5.00000 inch
The minimum value that may be set for this parameter is dependant on the
value set for the parameter “Pulse Count Multiplier - Med.”
Notes
You must set this parameter independently for each axis.
The default setting for on the pushbutton MTB
panel is LOW X1.
8.1.3
Pulse Count Multiplier-High