Rockwell Automation 8520-ARM2 9/Series CNC AMP Reference Manual Documentation Set - Manual (Page 696)

Tuning AMP at the Machine
Chapter 40
40-18
At the control:
1. Place the control in E-stop.
2. Press the
{UPLD/DWNLD}
softkey to display the following screen on
the operator panel CRT:
TO
PORT A
FROM
PORT A
TO
PORT B
FROM
PORT B
UPLD / DWNLD
AMP
PAL AND I/O
SELECT OPTION USING THE UP/DOWN ARROW
3. Use the up or down arrow keys to select the AMP option.
4. Depending on which port the storage device is connected to, press the
{FROM PORT A}
or
{FROM PORT B}
softkey.