Rockwell Automation 8520-ARM2 9/Series CNC AMP Reference Manual Documentation Set - Manual (Page 169)

Servo Parameters
Chapter 7
7-23
Function
Use this parameter to select the shunt resister value for your 22 kW system
module. This value must correspond to the hardware shunt module that it
is connected to.
Axis Parameter
Number
Axis Parameter
Number
(1) [1220] (9) [9220]
(2) [2220] (10) [10220]
(3) [3220] (11) [11220]
(4) [4220] (12) [12220]
(5) [5220] (13) [13220]
(6) [6220] (14) [14220]
(7) [7220] (15) [15220]
(8) [8220]
Range
Selection Result
(a) 300 W
(b) 900 W
(c) 1800 W
(d) 3600 W
Notes
This parameter must be set independently for each servo.
7.1.7
22KW Shunt Resistor Pack