Allied Telesis AlliedView-EMS 4.0.3 Device-Management User Manual
Page 91

AlliedView™-EMS 4.0.3 Device Management Guide
Page 91 of 468
•
Received Unicast Packets (HC)
•
Received Multicast Packets (HC)
•
Received Broadcast Packets (HC)
•
Transmitted Unicast Packets (HC)
•
Transmitted Multicast Packets (HC)
•
Transmitted Broadcast Packets (HC)
Note
- The current firmware version does not allow the Promiscuous Mode
parameter to be configured.
PHY Diagnostics
Test Interface
Displays entries containing objects for invoking tests on an interface.
Note
- The current firmware version does not allow Test Set Type
parameter to be configured.
TDR Diagnostics Table
Displays entries containing results of tests on an interface.
Error Statistics
Displays error statistics for the ports.
Note
- The Ethernet Chip Set parameter is not applicable to the AT-8000S series
and should be ignored.
Note
- The current firmware version returns a 'noSuchName' value for the following
parameters:
•
Alignment Error Frames
•
Multi Collision Frames
•
SQE Test Errors
•
Deferred Transmissions
•
Excessive Collisions
•
Internal MAC Transmit Errors
•
Carrier Sense Errors
•
Symbol Errors
Detail Info
Displays detailed port information such as duplex mode.
Note
- The current firmware version returns a 'noSuchName' value for the Physical
Address Type parameter.