Allied Telesis AlliedView-EMS 4.0.3 Device-Management - Manual (Page 298)

AlliedView™-EMS 4.0.3 Device Management Guide Page 298 of 468
Note - The current firmware version does not allow the Administrative Hello
Time and Migration parameters to be configured.
MSTP
Displays information maintained by every port about the Multiple Spanning
Tree Protocol.
Enable
Enables the port.
Disable
Disables the port.
Port Security
Config
Displays port security configuration parameters for every port present
in the switch.
Deletion
Displays configuration parameters to allow port security deletion.
Note - The current firmware version does not allow the MAC Address and
Port Security Deletion Activity parameters to be configured.
Traffic Management
Config
Displays traffic control configuration parameters for every port present
in the switch.
Segmentation
Displays the information that specifies the port with its traffic forward list.
Note - The current firmware version does not allow the Forward Ports
parameter to be configured.
Port Mirroring
Displays port mirroring parameters and allows configuration of port mirroring
status, destination port, Ingress source port and Egress source port.
Note - The current firmware version does not allow the Mirroring Source Port
(Ingress) and Mirroring Source Port (Egress) parameters to be configured.
QoS
Basic Config
Displays QoS parameters and allows enabling of Hol prevention status and
setting of scheduling mechanism.