Allied Telesis AlliedView-EMS 4.0.3 Device-Management - Manual (Page 82)

AlliedView™-EMS 4.0.3 Device Management Guide Page 82 of 468
Note - The current firmware version does not allow Port VLAN Tx Enable
parameter to be set to 'true' as its value.
Note - Device Manager does not handle objects of type BITS correctly. As a
result, the TLVs Tx Enable parameter will not be configurable and will display
an 8-bit binary string instead of the actual TLV types allowed. However, the
TLV types allowed can still be determined by looking at the bits that are on
from left to right:
•
Bit 0 - Port Description
•
Bit 1 - System Name
•
Bit 2 - System Description
•
Bit 3 - System Capabilities
Management Addresses
Displays control selection of LLDP management address TLV instances to be
transmitted.
LLDP Statistics
Remote Tables
Displays LLDP extension objects associated with remote systems.
Port Tx
Displays the LLDP transmission statistics for individual ports.
Port Rx
Displays the LLDP frame reception statistics for a particular port.
LLDP System Data
Local System
General Info
Displays LLDP information associated with local systems.
Port Info
Displays port information associated with the local system.
Management Addresses
Displays the management address information on the local system.
Note - The current firmware version returns the value 'NULL' for the
OID parameter.
Remote Systems
Connection Info
Displays one or more rows per physical network connection