Bridge menu – Allied Telesis AlliedView-EMS 4.0.3 Device-Management User Manual
Page 325

AlliedView™-EMS 4.0.3 Device Management Guide
Page 325 of 468
DNS
DNS Server
Displays DNS server information.
Note
- The current firmware version does not allow the Status parameter to
be set to 'active' as its value. Attempting to do so will result in the error
message "The error occurred with 'Set' operation. Error: time out
occurred".
DNS Client
Displays DNS Client information.
Bridge Menu
From the Bridge menu, you can view and edit bridge information such as the forwarding
database and the spanning tree status.
Forwarding Database
Standard View
Displays the Forwarding Database table as returned by the device.
Enhanced View
Displays the Forwarding Database table on a per port basis. User can select a
port or group of ports to view its corresponding Forwarding Database
entries.
Note
- The Port Number is displayed as x.y.z where x=stack id, y=module id,
z=port number instead of the port number only.
Discard/Aging Time Info
Displays information about the number of address entries that were learned but
discarded for reasons such as lack of memory or the entry's aging timer.
Note
- Valid MIB Set values for the Aging Time parameter is in the range [10-630]
inclusive.
Spanning Tree Info
Displays spanning tree parameters such as priority and cost.
Statistics
Displays statistics about frames received/transmitted on the switch port.
Basic Bridge Info
Displays basic bridge information.