Allied Telesis AlliedView-EMS 4.0.3 Device-Management - Manual (Page 278)

AlliedView™-EMS 4.0.3 Device Management Guide Page 278 of 468
Note - The current firmware version does not allow the Candidate ID and Candidate
Password parameters to be configured.
Candidate Switches
Displays information about candidate switches that belong to the group management
group.
Groups
Displays information about group management groups learned by the command
switch.
Neighbors
Displays information about group management Neighbors.
Date and Time
System Date and Time
Displays the current date and time configuration of the system.
Note - The current firmware version does not allow the Current Clock
parameter to be configured.
Summer Date and Time
Displays the summer date and time configuration of the system.
Note - The current firmware version does not allow the following parameters
to be configured:
•
Repeating Start
•
Repeating End
•
Annual Start
•
Annual End
SNTP
lays the SNTP configuration of the system.
System Log Server Config
Displays basic information and configuration of the System Log Server.
Reset Cold
Performs a hardware reset.
Reset Warm
Performs a software reset.
Note - This function is currently not supported.