Availability menu, Rmon menu, Port menu – Allied Telesis AlliedView-EMS 4.0.3 Device-Management User Manual
Page 357

AlliedView™-EMS 4.0.3 Device Management Guide
Page 357 of 468
Availability Menu
From the Availability menu, you can view the EPSR MIB.
EPSR
Displays the EPSR information of the device.
Note
- The current firmware version always returns an 'unknown' value for the From
State parameter.
RMON Menu
From the RMON menu, you can view and edit the RMON MIB.
Statistics
Displays traffic statistics in the network segment attached to each port.
History Control Table
Displays the RMON History table.
Note
- Device Manager does not handle MIB table with Read-Create access
correctly. Attempting to set any parameters of this table will not be successful.
Alarm Table
Displays the RMON Alarm table.
Event Table
Displays the RMON Event table.
Event Log
Displays the RMON Event log.
Port Menu
From the Port menu, you can view and edit MIB information about the port.
Utilization
Displays the port's utilization information.
Note
- When multiple units of the AT-x900-12X series are stacked together, the
'Base Ports' submenu is displayed even if the AT-XEM-STK is the only installed XEM
module in the device.