Allied Telesis AlliedView-EMS 4.0.3 Device-Management - Manual (Page 44)

AlliedView™-EMS 4.0.3 Device Management Guide Page 44 of 468
I/F Name-Address Translation
Displays information about the IP interface's name translated to an
IP interface address.
TFTP
Displays configuration information about the TFTP.
Note - The current firmware version does not allow the Send Config File
parameter to be configured.
Note - Configuring the Get Config File parameter will cause the device
to reboot and reset its running configuration to default configuration.
Note - The current firmware version does not allow the File Server
IP Address parameter to be configured.
UDP
Listener Info
Displays UDP listener information.
UDP Statistics
Displays UDP statistics.
TCP
Connection Info
Displays TCP connection-specific information.
Note - The current firmware version does not allow the Connection Status
parameter to be configured. Attempting to configure this parameter to any
valid value will result in the error "The error occurred with 'Set' operation.
Error: gen Error.".
TCP Statistics
Displays TCP statistics.
CIDR
Route Number
Displays the number of valid CIDR entries.
Route Table
Displays the CIDR routing tables.
Note - The current firmware version does not allow the Routing Type
parameter to be configured. Attempting to configure this parameter to any
valid value will result in the error "The error occurred with 'Set' operation.
Error. bad value.".