Allied Telesis AlliedView-EMS 4.0.3 Device-Management - Manual (Page 412)

AlliedView™-EMS 4.0.3 Device Management Guide Page 412 of 468
sequence of bytes in hexadecimal format instead of the actual IP address of
the remote host.
Note - Device Manager does not handle objects of type OCTET STRING
correctly. As a result, the Last Good Probe parameter will display a sequence
of bytes in hexadecimal format instead of the actual date and time of day.
Note - The current firmware version is unable to display any value for the
Owner Index and Test Name parameters.
Note - The current firmware version returns the value '???(3)' for the
Operational Status parameter when the Admin Status parameter in the Ping
Control table is set to enabled.
Ping Probe History Table
Displays ping probe history in performing ping operations.
Note - The current firmware version returns a 'noSuchName' value for the
Ping Probe History Table parameters.
Restart Device
Initiates a restart on the switch.
Note - For devices that is set to standalone mode, while the Reset operation is in
progress, error "The error with 'Set' operation. Error: time out occurred." will be
displayed and should be ignored.
Telnet
Starts a Telnet connection to the switch.
WEB Browser
Connects to the switch's HTTP server.
Routing Menu
From the Routing menu, you can view and edit information about the switch's IP routing
functions.
IP
Address Table
Standard
Displays the list of IP interfaces on the switch.
Note - The Re-assemble Max Size parameter is not applicable to the
SwitchBlade x908 and should be ignored.