Allied Telesis AlliedView-EMS 4.0.3 Device-Management - Manual (Page 217)

AlliedView™-EMS 4.0.3 Device Management Guide Page 217 of 468
Note - Valid MIB Set values for the Data Pattern parameter should range
from 1 to 4294967295. However, the current firmware version does not
allow Device Manager to display the correct value greater than 2147483647.
Attempting to enter values greater than 2147483647 will cause the new
value to be converted to the following values:
•
4286578688 - 4294934527: 8388608 - 16744447
•
4294934528 - 4294967167: 32768 - 65407
•
4294967168 - 4294967295: 128 - 255
Note - Device Manager does not handle objects of type OCTET STRING
correctly. As a result, the Address parameter will not be configurable and
will display a sequence of bytes in hexadecimal format instead of the actual
destination of ping packets.
Ping Statistics
Displays statistics of the Ping polling.
Security Menu
From the Security menu, you can view and edit port access entity information such as the
PAE port information and the Supplicant PAE information.
Port-based Authentication
Authentication Status
Displays the status of the port-based authentication.
PAE Port Info
Standard
Displays standard PAE port information.
Note - Device Manager does not handle objects of type BITS correctly. As a
result, the Capabilities parameter will display an 8-bit binary string instead of
the actual PAE functionality supported. However, the PAE functionality
supported can still be determined by looking at the bits that are on from
right to left:
•
Bit 0 - Authenticator
•
Bit 1 - Supplicant
Enterprise
Displays enterprise PAE port information.