Allied Telesis AlliedView-EMS 4.0.3 Device-Management User Manual
Page 37

AlliedView™-EMS 4.0.3 Device Management Guide
Page 37 of 468
POE Config
Displays POE device's configurations.
Note
- AT-8000GS/24POE: When multiple units of the AT-8000GS series are
stacked together, the current firmware version does not allow the Maximum
PSE Power parameter to be configured to 'none' if the Unit ID of the device
is '3', '4', '5' or '6'.
Socket Info
Displays the sockets information which are currently open in the system.
Management Info
General Management
Displays common management information.
Note
- The current firmware version does not allow the Reboot Delay
parameter to be configured.
Note
- Configuring the Action parameter to 'delete lan tab' will not return an
error message.
Flash File System
Basic Info
Displays the flash file size of the device.
File Lists
Displays the device's list of files.
File Copy Info
Displays the current history index and messages for file copy.
Jumbo Frames
Displays the current jumbo frames status.
Management ACL
Basic Info
Displays basic information about the management access list.
Access Lists
Displays information about access lists.
Note
- Configuring the Row Status parameter to invalid values will not return
an error message except for the 'create and go' value.