Allied Telesis AlliedView-EMS 4.0.3 Device-Management - Manual (Page 317)

AlliedView™-EMS 4.0.3 Device Management Guide Page 317 of 468
Fan Speeds
Displays information about fans installed in the device that have their
fan speeds monitored by environment monitoring hardware.
Voltage Rails
Displays information about voltage rails in the device that are
monitored by environment monitoring hardware.
Temperature Sensors
Displays information about the temperature monitored by the
temperature sensors in the device.
LED Faults
Displays information about the LEDs on the device.
Contact Details / Memory
Displays Contact Details information and Memory information of the device.
Host Resources
General System Info
Displays general information about the host resources.
Note - Device Manager does not handle objects of type OCTET STRING
correctly. As a result, the Time and Date parameter will display a sequence
of bytes in hexadecimal format instead of the actual date and time of day.
Note - The Time and Date, Initial Load Device and Initial Load Parameter
parameters are implemented as 'read-only'.
Logical Storage Areas
Displays resource information about the storage devices.
Note - The current firmware version returns a 'noSuchName' value for the
Allocation Failures parameter.
Note - The Storage Size parameter is implemented as 'read-only'.
Note - The current firmware version does not return complete values for the
parameters under the Logical Storage Areas table and Device Manager does
not handle Get-Next request for this table correctly. As a result, the Used
Storage Size parameter displays incomplete values.
Note - The Allocation Failures parameter is not applicable to the AT-x600
series and should be ignored.
Host Info
Displays the host information of the device.