Allied Telesis AlliedView-EMS 4.0.3 Device-Management - Manual (Page 387)

AlliedView™-EMS 4.0.3 Device Management Guide Page 387 of 468
Ping Results
Displays the results of the performed ping operations in the Ping Control
table.
Note - Device Manager does not handle objects of type OCTET STRING
correctly. As a result, the Target IP Address parameter will display a
sequence of bytes in hexadecimal format instead of the actual IP address of
the remote host.
Note - Device Manager does not handle objects of type OCTET STRING
correctly. As a result, the Last Good Probe parameter will display a sequence
of bytes in hexadecimal format instead of the actual date and time of day.
Note - The current firmware version is unable to display any value for the
Owner Index and Test Name parameters.
Note - The current firmware version returns the value '???(3)' for the
Operational Status parameter when the Admin Status parameter in the Ping
Control table is set to enabled.
Ping Probe History Table
Displays ping probe history in performing ping operations.
Note - The current firmware version returns a 'noSuchName' value for the
Ping Probe History Table parameters.
Restart Device
Initiates a restart on the switch.
Note - For devices that is set to standalone mode, while the Reset operation is in
progress, error "The error with 'Set' operation. Error: time out occurred." will be
displayed and should be ignored.
Telnet
Starts a Telnet connection to the switch.
WEB Browser
Connects to the switch's HTTP server.