Allied Telesis AlliedView-EMS 4.0.3 Device-Management - Manual (Page 215)

AlliedView™-EMS 4.0.3 Device Management Guide Page 215 of 468
POE/PSE Port Info
Displays a table that contains one row per port of PSE/PoE information on
the local system known to this agent.
802.3 Config
Port Config
Displays the LLDP configuration information that controls the transmission
of IEEE 802.3.
Note - The current firmware version does not allow the 802.3 TLVs Tx
Enable parameter to be configured.
Note - Device Manager does not handle objects of type BITS correctly. As a
result, the TLVs Tx Enable parameter will not be configurable and will display
an 8-bit binary string instead of the actual TLV types allowed. However, the
TLV types allowed can still be determined by looking at the bits that are on
from left to right:
•
Bit 0 - Port Description
•
Bit 1 - System Name
•
Bit 2 - System Description
•
Bit 3 - System Capabilities
Ethernet Port Info
Displays information about a particular port component.
Link Aggregation Info
Displays link aggregation information about a particular port component.
Frame Size Info
Displays maximum frame size information about a particular port
component.
Availability Menu
From the Availability menu you can view and edit Server Load Balancing and Ping Polling
information.
Server Load Balancing
General Info
Displays basic server load balancing information.
Resources
Displays server load balancing resources information.