Allied Telesis AlliedView-EMS 4.0.3 Device-Management - Manual (Page 282)

AlliedView™-EMS 4.0.3 Device Management Guide Page 282 of 468
Note - The current firmware version does not allow the Row Status and
Metric Type parameters to be configured.
Link State Ads
Displays the OSPF Process' Link State Database.
Note - The Link State Ads sub-menu option does not display the correct
parameters. Instead, it displays the sub-menu option name as a parameter
with a value of 'noSuchName'.
Host Info
Displays the list of hosts, and their metrics, that the device will advertise as
host routes.
Note - The current firmware version does not allow the Metric parameter to
be set to 0.
Interface Info
Displays the interfaces from the viewpoint of OSPF.
Note - The current firmware version does not allow the following parameters to
be configured:
•
Type
•
Transit Delay
•
Retransmission Interval
•
Multicast Forwarding
•
Demand
•
Authentication Type
•
Authentication Key
•
Authentication Key ID
•
Row Status
Interface Metric
Displays the Type of Service metrics for a non-virtual interface.
Note - The current firmware version does not allow the Value parameter to
be set to 0.
Virtual Interface Info
Displays information about this device's virtual interfaces.
Note - The current firmware version does not allow the following parameters to
be configured:
•
Authentication Type
•
Authentication Key
•
Authentication Key ID