Allied Telesis AlliedView-EMS 4.0.3 Device-Management - Manual (Page 120)

AlliedView™-EMS 4.0.3 Device Management Guide Page 120 of 468
Note - The current firmware version returns the value 'NULL' for the
Routing Protocol MIB parameter.
UDP
Displays UDP listener information.
TCP
Displays TCP connection-specific information.
Note - The current firmware version does not allow the Connection Status
parameter to be configured.
ICMP Statistics
Displays ICMP Statistics.
Bridge Menu
From the Bridge menu, you can view and edit bridge information such as the forwarding
database and the spanning tree status.
Forwarding Database
Standard View
Displays the Forwarding Database table as returned by the device.
Enhanced View
Displays the Forwarding Database table on a per port basis. User can select a
port or group of ports to view its corresponding Forwarding Database
entries.
Discard/Aging Time Info
Displays information about the number of address entries that were learned but
discarded because either there was a lack of memory or the entry's aging timer
expired.
Spanning Tree Info
Displays spanning tree parameters such as priority and cost.
Statistics
Displays statistics about frames received/transmitted on the switch port.
Basic Bridge Info
Displays basic bridge information.