Allied Telesis AlliedView-EMS 4.0.3 Device-Management - Manual (Page 284)

AlliedView™-EMS 4.0.3 Device Management Guide Page 284 of 468
Neighbor Info
Displays a list of the device's DVMRP neighbors, as discovered by receiving
DVMRP messages.
Note - The Neighbor Info sub-menu option does not display the correct
parameters. Instead, it displays the sub-menu option name as a parameter
with a value of 'noSuchName'.
Route Table
Displays the table of routes learned through DVMRP route exchange.
Next Hop Table
Displays the table containing information on the next hops on outgoing
interfaces for routing IP multicast datagrams.
Note - The Next Hop Table sub-menu option does not display the correct
parameters. Instead, it displays the sub-menu option name as a parameter
with a value of 'noSuchName'.
PIM
Basic Info
Displays the default interval at which periodic PIM-SM Join/Prune messages
are to be sent, PIM Parameter Settings, Candidate - Rendezvous Point Global
Settings, and Candidate - BSR Settings.
Note - The current firmware version returns ‘noSuchName’ for the
Join/Prune Interval parameter and does not allow it to be configured.
Note - Valid MIB set values for the Register Probe Time parameter are in the
range [0-127] inclusive.
Note - Valid MIB set values for the Register Suppression Time parameter are
in the range [1-255] inclusive.
Interface Info
Displays the list of device's Protocol Independent Multicast interfaces.
DR Priority
Displays the DR Priority of the router's interface.
Neighbor Info
Displays a list of the device's PIM neighbors.
Note - The current firmware version returns ‘noSuchName’ for the Mode
parameter.