beautypg.com

Lldp menu – Allied Telesis AlliedView-EMS 4.0.3 Device-Management User Manual

Page 416

background image


AlliedView™-EMS 4.0.3 Device Management Guide

Page 416 of 468

802.1p

Device Capabilities

Displays the device capabilities information.


Traffic Class

Displays the bridge traffic class and received traffic class info.

Note

- The Traffic Class Priority parameter is not applicable to the

SwitchBlade x908 and should be ignored.

Note

- The Received Traffic Class parameter is implemented as 'read-only'.

LLDP Menu

From the LLDP menu, you can view and edit LLDP configurations, statistics, local system

data and remote systems data components.

Note

- When multiple units of the SwitchBlade x908 are stacked together, port numbering is

continuous based on the Stack ID.

Stack ID 1 = 1 - 96

Stack ID 2 = 97 - 192

Stack ID 3 = 193 - 288

Stack ID 4 = 289 - 384

This numbering scheme assumes that a unit can have a maximum of 96 ports.

LLDP Configuration

General Config

Displays LLDP general function such as enabling LLDP, transmission delays
and others.


Port Config

Standard

Displays the LLDP configuration information of a particular port.

Note

- Device Manager does not handle objects of type BITS

correctly. As a result, the TLVs Tx Enable parameter will not be

configurable and will display an 8-bit binary string instead of the actual

TLV types allowed. However, the TLV types allowed can still be

determined by looking at the bits that are on from left to right:

Bit 0 - Port Description

Bit 1 - System Name

Bit 2 - System Description

Bit 3 - System Capabilities